The iPhone is a very reliable device, but even the best smartphones can sometimes have problems.

If your iPhone has a bright white blank display with no icons or apps on your screen, you may be facing the dreaded white death screen of your iPhone.

As the name implies, it’s scary, but it’s not a device issue, so you don’t have to go out and get a new one.

White screen iPhone

With proper troubleshooting steps and solutions, you can fix the white screen on your iPhone and hopefully the device will work again.

What Causes the White Screen of Death on iPhone?

The white screen on your iPhone will hang when the device is locked due to a software and hardware failure. After heavy drops or water intrusions, for example, causing hardware component failures such as loose or broken cables, or software errors due to failed app or operating system upgrades.

When the battery is low, all system functions may stop and the iPhone screen may be white or blank.

Also, when you try to jailbreak your phone, you may see a white screen on your iPhone and the operation may fail. Similarly, if your iPhone is old or widely used, you may see a white horizontal or vertical line on your phone indicating that your device needs to be replaced.

Those who have a white screen iPhone

Last but not least, a corrupted SD (memory) card or a corrupted file in storage can cause your iPhone to turn white or show a frozen display that only shows the Apple logo. I have.

How to fix iPhone stuck on white screen

Whatever the cause of the problem, you can use some troubleshooting steps to resolve the problem.

1. Disable the magnification setting

Before trying other troubleshooting steps to resolve iPhone white screen death, make sure you haven’t accidentally enabled screen enlargement. You may have magnified the document or image. This makes it look like there is a problem with the iPhone.

To resolve this, tap with three fingers to see if the screen is magnified. When you do this, the screen will return to normal display. In that case, use the following steps to disable the iPhone magnification setting.

  1. Open Settings> General..
Settings> General” class =”wp-image-11674″ srcset =” jpg 387w, -general-188×300.jpg 188w, it-magnification-settings-general-31×50.jpg 31w” sizes =”(max-width: 387px) 100vw, 387px”/></figure>
<ol start=
  • Then tap Accessibility> Zoom Then tap off Turn off the magnification.
  • Accessibility> Zoom Off” class =”wp-image-11675″ srcset =” off.jpg 484w, -accessibility-zoom-off-242×300.jpg 242w, to-fix-it-magnification-accessibility-zoom-off-40×50.jpg 40w” sizes =”(max-width: 484px) 100vw, 484px”/></figure>
<h4><strong>2. Hard reset iPhone</strong></h4>
<p>If you still see a white screen on your iPhone and your device doesn’t respond to taps, try a hard reset.  Resetting your iPhone will also clear some memory, but you won’t lose any data as you would with a factory reset.</p>
<li>To hard reset iPhone (iPhone 6 or later) <strong>House </strong>When <strong>Sleep / wake</strong> Button at the same time.  For iPhone 7, <strong>Volume down</strong> When <strong>Sleep / wake</strong> button.</li>
<li>When the screen flashes and the Apple logo appears, release the button to allow the device to boot normally.</li>
<div class=
    IPhone being reset

    Note: For iPhone 8 and later models, press and release the volume up button, then press and release the volume down button. Press and hold the side (sleep / wake) button until your iPhone restarts, then release the button when you see the Apple logo on your screen.

    3.3. Put iPhone in recovery mode

    If you don’t see a white screen after a hard reset, put your iPhone in recovery mode and restore from backup.

    Recovery mode helps troubleshoot iPhone software issues, so you can reinstall the operating system and restore data from backup.

    IPhone in recovery mode
    1. To do this, make sure you have a computer with iTunes, then turn off your iPhone.
    2. Connect the sync cable to your phone (not your computer). If you have an old iPhone (6 or earlier) House Press the button to connect the cable to your computer, and for iPhone 7, Volume down Press the button when the phone is connected to your computer. For iPhone 8 and later models ~ side (Sleep / Wake) button while connecting the cable to your computer.
    3. The recovery mode screen is displayed while you hold down the button on your iPhone. If your iPhone screen goes black, you’re in recovery mode and you can follow the prompts on the screen to do the following: return Device from backup or update iOS.
    Screen refresh, restore, or cancel
    1. Tap return Restore iPhone from backup.
    Restore options

    4. Put your iPhone in DFU mode

    You can use the device firmware update mode, also known as DFU mode, to turn on your iPhone and avoid software problems without booting the operating system. In this way, you can make changes to iOS and reinstall iOS. It may sound complicated, but it’s more powerful than recovery mode.

    To put your iPhone in DFU mode, connect your device to your computer and open iTunes.

    1. Turn off the phone and press and hold either Sleep / Power + Home Button (iPhone 6 or earlier) or Side button + volume Press the button (iPhone 7 or later) at the same time for about 10 seconds.
    iPhone close-up

    NoteIf you hold down the: button and see the Apple logo, you’ve been holding it down for too long and you’ll need to repeat this step.

    1. After 10 seconds, release the sleep / power or side button and press and hold the volume button. If you see the iTunes logo, you’ll have to start over, but if your iPhone screen goes black, you’re in DFU mode.
    2. Follow the instructions on the iTunes screen to complete the process and see if your iPhone screen returns to normal again.

    5. Contact Apple Support

    If you’ve tried all of the above fixes and you still don’t see a white screen on your iPhone, you need to escalate the issue to an expert. Contact Apple Support by phone or email, or visit your nearest Genius bar for help.

    Tips to prevent your iPhone from getting stuck on a white screen

    Sometimes it is better to prevent a problem before it occurs than to spend time and effort trying to solve it. Here are some tips to prevent the white screen of your iPhone from appearing again.

    • Store your iPhone in a dusty place, in a damp environment, and out of exposure to environmental stress.
    • Get your iPhone’s protective case and screen protector to protect it from heavy drops and the impact of water ingress. Protective accessories also help extend the life of your cell phone by reducing the possibility of hardware damage.
    • Beware of overheating due to extra stress on the iPhone’s hardware resources, including the battery. Shut down your phone from time to time to take a break.

    Make iPhone work again

    I hope one of these fixes helps. If the white screen of death persists, feel free to book and visit your nearest Apple store. Or you can buy a new phone if your budget allows.

    If your iPhone gets wet with water or other liquids, see our guide on how to repair a wet or liquid-damaged smartphone. You can also read how to fix a stuck iPhone in a continuous boot loop, and how to replace or repair a broken iPhone screen if you drop the phone.

    By admin

    Leave a Reply

    Your email address will not be published. Required fields are marked *